Ingenia A-BW

Automatic bending machine

Ingenia A-BW is a semi-automatic machine for bending plastic sheets up to 15 mm thick. Bending cycle runs automatically. Bending times are set on the display. Bending angle is set with manual adjuster from 10° to 95°. Heating and bending is executed in one position plastic sheets do not have to be moved during the cycle. This makes handling the machine much easier and operator-friendly.
Ingenia A-BW is available with working width of 2 m, 3 m and 4 m.


PTFE coated heating elements with separate temperature regulators

Digital timer with option to prolong / shorten each step of bending cycle

Manual valves for regulation plastification and bending forces

Milled surfaces of top table and clams prevent from moving of workpieces

PE coated support arms

Carrier beam with quick release studs

Two separately operated clamping zones (for 3 and 4 m versions)

Steplessly regulated bending angle 10-95°

Steplessly regulated clamping pressure according to material hardness

Integrated gauge for sequential bending

Transportation wheels


20.15 A-BW30.15 A-BW40.15 A-BWUnit
Width (without extension arms)930930930mm
Height / height of table110011001100mm
Weight, approx1,41,72,1t
Max. Working width205030504050mm
Material thickness for bending3-153-154-15mm
Minimum cross-section of square tube220 x 295220 x 295220 x 295mm
Minimum bending angle101010o
Maximum bending angle959595o
Number of clamping zones per beam222
Power supply230/400 V 3/N/PE 50 – 60 Hz
Clamping force, 7 /10 bar10 (14)15 (21)20 (33)kN
Max. bending force151520kN
Heating unit
2 heating elements25 x 50 mm with coating PTFE Tmax=260o
  • Podaj nam dodatkowe informacje:

    (gięte tworzywa, typowa grubość obrabianych płyt, maksymalna grubość płyt, maksymalna szerokość płyt, ilość stref jednoczesnego podgrzania, średni i maksymalny czas nieprzerwanej pracy, inne oczekiwania itp.)

    • (max file size 32 MB)

Nr kat.: 4123609 Kategoria: