Multipiegaplex 1200 - 2000 - 3000

Heating machine for bending thermoplastic sheet

This versatile and easy-to-use modular machine is particularly suitable for the multiple, localized, bilateral heating of the sheets, with the possibility of making up to 4 bends in one single operation. By simply detaching the upper heating units and positioning them in battery with the lower ones, the heating zone can be doubled (up to 8 bends). Heating takes place by radiancy without contact, with fully tested, low voltage wire resistances (0-48 V). The Multipiegaplex machine consists of a structure fitted with two aluminium metric guides, housing 2-3-4 double mobile heating sets (upper and lower heating units)and a piece positioning reference square.

The heating unit, which permits to obtaing a localized heating zone from 5 to 40 mm is composed of two sheet supporting sections with adjustable opening, cooled by water circulation, which house the wire resistance. Starting and heat adjustment (0-600°) are independent for each set of units (on request for each unit). Position the sheet to be bent and, after setting the heating time on the electronic timer, just work the pedal to start up the operating cycle (upper heating unit descent, pneumatic piece locking with automatic release at end of cycle). We wish to point out that once the piece has been heated it is essential to remove it from the machine and position it on a template to obtain the bending angle required. On request the machine can be supplied complete with electric water cooler

In standard:

Electric power supply 220 V\380 V. TRIF

Pneumatic feed 5 Atm

Min. centre distance between bends 42 mm

Max. centre distance between lst and last bend 1000 mm (STANDARD)

Water supply, with or without recycling

EEC Safety Standards, Photoelectric cell.

Max. working thickness 10 MM

Working length 1250 - 2050 mm

Resistance adiustment adjustable sheet +-8mm

Resistance power 500 Watt/m (approx)

Piece positioning square with metric rule


Max bendable length1250 mm2050 mm3050 mm
Max bendable thickness

10 mm

Weight25 0Kg350 Kg450 Kg
Overal dimension lenght1600 mm2400 mm3400 mm
Overal dimension width

1100 mm

Overal dimension height

1250 mm

  • Would you like to find out more about machine? Provide us with more information on your project / expectations.

    Our technican will contact you soon.
    • (max file size 32 MB)