Riexinger GR-BSM

Innovative large diameter pipe cutting system

Today, most water, wastewater and rainwater transportation systems are made of plastic pipes with diameter up to 4,5 m. Processing large diameter pipes requires extreme precision and compliance with safety regulations.

RIEXINGER large diameter pipe cutting machines are designed to meet requirements of modern production processes. Almost entire cutting cycle is computer-controlled and employee involvement is limited to monitoring the machine in operation.

Contact our technican for the most suitable solution for your application!

Setting up standards in the industry

Comparing to conventional solutions for cutting large-diameter pipes, cutting with Riexinger GR-series band saw results in to 50-60% time savings. Machined surfaces are fine finished, don’t require further processing and guarantee perfect fitting. Thanks to possibility of using various types of cutting tapes, Riexinger saws perfectly process almost every type of material (plastic, composite etc) with wall thickness ranging from few mm to over 140 mm.

Riexinger gr bsm.jpg
Riexinger gr bsm

All benefits at a glance:

Each GR- series saw is operated via. large touch screen control panel. Operator inputs parameters for subsequent cutting steps by selecting appropriate symbols.

RIEXINGER sets new standard for maintenance and saw blade replacement in terms of safety and servicing time. Normally, changing saw blades in a large saw is a time-consuming and complicated process, that requires lifting devices, ladders and proper tools. With Riexinger saws, the arm can be lowered easily, without a need of external crane or hoist.

GR-series saw will do almost every cut:

By means of Riexinger band saws for large diameter pipes, any required cut can be made economically. Different cuts are possible without moving or rotating the pipe. This results in previously unattainable accuracy and quality as well as huge time savings.

Riexinger gr bsm

Cuts that can be made with any saw of GR series in the basic configuration:

Płynna nastawa kąta cięcia w zakresie od -45 do 45 stopni

Steplessly adjustable angle cut from 45° to 135°

Wycięcia w kształcie litery V (trójniki)

V-cut on the main pipe for T-piece

V-cut on the outlet pipe for T-piece

90° straight cut for cutting pipes to length or for pipe end machining

Cięcie 67,5°/22,5° na wylocie (trójniki)

67.5°/22.5° cut on the outlet pipe to create Y-pieces

Cięcia pod kątem 90st na dowolną głębokość

90° cross section cut

Even more flexibility with extra cutting options:

Zaprogramowane sekwencje cięcia

Programmable cutting sequences that can be stored as so-called recipes

Indywidualne sekwencje cięcia które można programować i modyfikować

Individually configurable cutting sequences for every application

Cięcia po łuku

Radius cuts on the outlet pipe

Tworzenie dowolnych wcięć pod trójniki

Creation of flexible Y-pieces with variable angle in main and outlet pipe

All benefits at a glance:

Innovative design with movable saw arc and open workspace

Automatic segment cutting without moving the pipe

Fast & easy loading and unloading thanks to low based platform

Precise adjustment of cutting position without moving the pipe

Precise cutting at different angles

Intuitive control panel with multiple languages to choose from

Easy blade replacement without an elevator or ladder

All GR-series saws are equipped ex-factory with effective safety devices:

Safety button

Electronic brake of saw blade

Overload protcetion for drives and electronics

Cutting line laser indicator etc.


GR-BSM 1200 GR-BSM 2500GR-BSM 3500 GR-BSM 4500
Lenght mm:8.4008.40010.60012.600
Width mm:5.0006.6007.8008.900
Height mm:3.0004.3005.3006.400
Weight kg:5.0007.0009.00012.000
Sawing range mm355 – 1.200630 – 2.500630 – 3.500630 – 4.500
GR-BSM 1200GR-BSM 2500GR-BSM 3500GR-BSM 4500
Operating voltage:400 V
Frequency:50/60 Hz
Fuse:32 A
Connected load:20 kW
Connected load main drive:5,5 kW
Scope of delivery:- 1x basic machine „GR-BSM”
– 1x Control panel
– 1x operating manual
– additionally selected options and equipment
  • Would you like to find out more? Please fill in form below.

    Our technican will contact you soon.
    1. Select model and extra options
    2. Diameter of pipes to be cut mm:
    3. Wall thickness
    (In the standard version worktable has a predetermined size. If you specify pipe length that exceeds length of the table, we will offer optional table enlargement or mobile supports with rollers)

Nr kat.: 4123580 Kategoria: